 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
17. INSTALL ROD (1) IN PISTON
ASSEMBLY (2).
a. Install rod (1) ipiston assembly (2).
19. INSTALL PISTON ASSEMBLY (2) IN
Press new retaining ring (3) into
BRAKE ASSEMBLY (5).
groove (4).
a. Coat piston assembly (2) with
18. REPEAT STEPS 15, 16, AND 17 FOR
transmission oil.
REMAINING THREE RODS (1) AND
b. Press piston assembly (2) into
PISTON ASSEMBLIES (2).
brake assembly (5).
20. INSTALL AND SECURE SPRING (6).
a. Place spring (6) and collar (7) on
rod (1). Install collar with cupped
side up.
b. Hold rod (1) in place. Using
9/16-inch open end wrench, press
collar (7) until pin hole in rod (1)
is visible,
c. Insert pin (8) through hole in rod (1).
d. Release pressure on spring (6).
21. REPEAT STEPS 19 AND 20 FOR
REMAINING THREE PISTON
ASSEMBLIES.
4-206
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals