 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
42. INSTALL TWO PLUGS (1).
a. Coat two new preformed packings (2)
with engine oil. Install packings on two
plugs (1).
b. Install two plugs (1).
43 USING 3/8-lNCH DRIVE TORQUE
WRENCH AND 3/16-lNCH SOCKET
WRENCH ATTACHMENT, TORQUE TWO
PLUGS (1) TO 110-120 in-lb
(127-138 cmkg).
44. REPAIRER AND HELPER TURN
HOUSING (3) OVER AND PLACE ON
WOOD BLOCKS.
45. INSTALL FOUR NEW BRAKE PADS (4).
a. If pads (4) were discarded, replace with
new pads. If pads were not discarded,
go to step 47.
b. Position four pads (4) from underside of
housing (3). Rotate pads until hole in
pad alines with screw hole in housing.
c. (H) Using 1-inch drive ratchet handle
and 1 3/4-inch socket, hold pads (4).
Install four washers (5) and screws (6).
46. USING 1/2-lNCH DRIVE TORQUE
WRENCH, TORQUE FOUR SCREWS (6)
TO 40-45 ft-lb (6 mkg).
4-192
Change 4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals