REPAIR INPUT BEVEL HOUSING INSERTS

TM 9-2520-270-34

REPAIR INPUT BEVEL HOUSING INSERTS

This task consists of subtasks that identify the two possible types of inserts used. Each subtask gives

location and size of inserts, part or item number of tools and kits, and working dimensions. To remove,

repair, and install inserts, identify type of insert used and refer to either Replace Inserts, page 2-171 or

Replace Helical Coil Inserts, 2-166.

Page

Subtask

Repair Input Bevel Housing Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Repair Input Bevel Housing Helical Coil Inserts . . . . . . . . . . . . . . . . . . . . . . .

REPAIR INPUT BEVEL HOUSING INSERTS

(NON-HELICAL COIL)

Tools:

Materials/Parts:

Sealant compound (Item 11, App B)

General mechanic's tool kit:

automotive (Item 33, App C)

Transmission oil (Item 12, App B)

Industrial goggles -- (Item 39, App C)

Inside/outside indicator caliper --

Personnel Required:

(Item 41, App C)

Track Veh Rep 63H10

Portable electric drill --

(Item 58, App C)

Equipment Conditions:

Screw threading set --

(Item 65, App C)

Input bevel housing on workbench.

Socket wrench set (Item 88, App C)

Transmission insert repair kit --

CAUTION

(Item 103, App C)

Insert must be replaced with same type as

Compressed air source, 30 psi (207 kPa)

removed or damage to equipment can occur.

maximum

4-138

Change 3