 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
10. IF HUB (1) WAS REMOVED, GO TO
STEP 11. IF NOT, GO TO STEP 14.
11. INSTALL NEW HUB (1).
a. Aline screw and oil holes in new
gasket (2) and new hub (1) with screw
and oil holes in housing (3). Put gasket
and hub in place.
12. INSTALL SIX SCREWS (4).
13. USING 1/2-INCH DRIVE TORQUE
WRENCH, TORQUE SIX SCREWS (4)
TO 20-25 ft-lb (3 mkg).
CAUTION
Do not spread seals more than needed. Seals
are brittle and easily broken.
WARNING
15. INSTALL TWO SEALS (6).
Solvent fumes can burn and
could poison you. Read warn-
a. Coat two seals (6) with petrolatum.
ing in the front of this
b. Install seals (6) in grooves (5) in
manual.
hub (1).
C.
Hook each seal (6) so that hooks (7)
are closed.
14. CLEAN SEAL GROOVES (5) IN HUB (1).
a. Use wiping rag dampened with
16. IF HUB (1) WAS REMOVED, GO TO
cleaning solvent.
STEP 17. IF NOT, GO TO STEP 19.
4-124
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals