 |
|||
|
|
|||
|
Page Title:
INSTALL RIGHT SIDE SET RETAINER |
|
||
| ||||||||||
|
|
 TM 9-2520-270-34
NOTE
Nicks and burrs must be removed from shim(s)
before use.
121. INSTALL RIGHT SIDE SET
RETAINER (2) AND SHIM(S) (1).
a.
Slide shim(s) (1) onto retainer (2)
and press retainer into housing (3).
Aline six bolt holes in retainer (2)
b.
and shim(s) (1) with housing (3).
Using plastic-faced hammer, tap
retainer into place.
Install six bolts (4).
c.
1 2 2 . USING l/2-lNCH DRIVE TORQUE
WRENCH, TORQUE SIX BOLTS (4)
TO 25-30 ft-lb (3-4 mkg).
123. ROTATE TRANSMISSION SO BOTTOM
120. REPLACE SHIM(S) (1) WITH SET THAT
SIDE IS UP AND GO TO STEP 88.
IS 0.005 INCH (0.13 mm) THINNER.
125. WORKING ON RIGHT SIDE OF
TRANSMISSION, REMOVE SIX
BOLTS (4) FROM RETAINER (2).
126. COAT THREADS OF SIX BOLTS (4)
W I T H SEALANT COMPOUND.
127. INSTALL SIX BOLTS (4)
IN RETAINER (2).
124. REMOVE BRACKET (5).
1 2 8 . USING l/2-lNCH DRIVE TORQUE
a. Remove two screws (6) and
WRENCH, TORQUE SIX BOLTS (4)
bracket (5). Place screws with power
TO 25-30 ft-lb (3-4 mkg).
takeoff assembly for reinstallation.
GO TO NEXT PAGE
4-119
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals