 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
WARNING
Do not drop gearshaft.
Personel can be injured.
WARNING
Coupling can fall off shaft.
Personnel can be injured.
CAUTION
U s e care when installing gearshaft or
damage to hose assembly and hose clamp
can result.
80. COAT INSIDE OF COUPLING (3)
W I T H TRANSMISSION OIL. INSTALL
79. INSTALL GEARSHAFT (1) IN RIGHT
C O U P L I N G ON GEARSHAFT (1).
SIDE OF HOUSING (2).
NOTE
Shim(s) will only go on one way. Nicks and burrs
must be removed from shim(s) before use.
81. INSTALL RIGHT SIDE SET
RETAINER (4) AND SHIM(S) (5).
a.
If shim(s) (5) were lost or damaged
during removal, start installation with
.065 inch shim(s).
b.
Remove tags from retainer (4) and
shim(s) (5).
c.
Aline six bolt holes in retainer (4) and
shim(s) (5) with holes in housing (2).
d.
Using plastic-faced hammer, tap
retainer (4) into housing (2).
e.
Install six bolts (6).
82. USING 1/2-lNCH DRIVE TORQUE
WRENCH, TORQUE SIX BOLTS (6)
TO 25-30 ft-lb (3-4 mkg).
GO TO NEXT PAGE
4-111
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals