 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
15. INSPECT BUSHING (4).
I
a. Inspect bushing (4) for grooves, scoring,
and scratches.
b. If bushing (4) is damaged, go to step 16.
14. REMOVE BEARING (1) FROM GEAR (2).
If not, go to step 17.1.
a. Set up gear (2) in arbor press on two
blocks of wood.
16. IF GEAR (2) WAS NOT REMOVED, GO TO
b. Using bearing installer (3), press out
STEP 17. IF GEAR WAS REMOVED, GO TO
b e a r i n g (1).
STEP 17.1
17. REPAIRER AND HELPER REMOVE
GEAR (2) FROM HOUSING (5).
a. (H) Hold housing (5) on workbench.
b. Remove Iockwire (6) from six
screws (7).
c. Remove six screws (7) and
washers (8). Turn over housing (5).
d. Using pry bar, evenly pry off gear (2).
4-86
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals