 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
CAUTION
Flexible cover must be in position on
pressure indicator at all times. Damage to
equipment can occur.
REMOVE PRESSURE INDICATOR (1).
3.
a. Unscrew indicator (1).
b. Remove and discard preformed
packings (2) and (3).
4.
INSPECT PRESSURE INDICATOR (1) FOR
FLEXIBLE COVER (4).
a. If flexible cover (4) is on indicator (1),
go to step 5. If not, replace indicator.
CAUTION
Bolt is under spring pressure. Use care when
removing bolt. Failure to do so can result in
loss of parts.
5. REMOVE BYPASS VALVE PISTON (5)
FROM OIL FILTER COVER
ASSEMBLY (6).
(H) Hold cover assembly (6) on
a.
workbench.
Using adapter and 35-mm socket,
b.
remove bolt (7) releasing spring (8)
and piston (5). Remove spring and
piston.
Remove and discard preformed
c.
p a c k i n g (9).
6. CLEAN OIL FILTER COVER ASSEMBLY.
a. Clean oil filter cover and piece parts. See
7. INSPECT OIL FILTER COVER ASSEMBLY.
a. Inspect oil filter cover and piece parts.
See page 2-5.
GO TO NEXT PAGE
4-76.3
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals