 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
NOTE
New springs must be used with new clutch
plates.
26. INSTALL 12 PINS (2) AND SPRINGS (3)
CAUTION
Do not lower transmission below horizontal
IN PLATE ASSEMBLY (4).
position. Parts may fall out and be damaged.
a. Firmly seat 12 pins (2) in plate
25. SLOWLY LOWER TRANSMISSION (1)
assembly (4).
TO HORIZONTAL POSITION.
b. Place spring (3) on each pin (2).
CAUTION
Do not allow springs to fall off plate assembly.
Damage to equipment can result.
27. INSTALL PLATE ASSEMBLy (4).
a. Install plate assembly (4) so that
pins and springs (3) are positioned
against tangs (5). Hold plate assembly
in place.
28. USING 1/2-INCH DRIVE TORQUE
b. Alternately install 12 washers (6)
WRENCH, TORQUE 12 SCREWS (7)
and screws (7).
TO 28-30 ft-lb (4 mkg).
4-58
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals