 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
22. INSPECT ROLLER BEARINGS (1)
23. REMOVE AND DISCARD BEARING (1).
AND (2).
a. Place gear (3) on two wood blocks.
a. Inspect bearings (1) and (2) for
Do not place blocks in way of
damage. See TM 9-214.
bearing (1).
b. If either bearing (1) or (2) is
b. Using 1/8-inch drive pin punch
damaged, go to step 23. If bearings
(Item 26) and hammer, remove and
are not damaged, go to step 26.
discard bearing (1).
25. REMOVE AND DISCARD BEARING (2).
24. REMOVE INTERNAL SNAP RING (4).
I
a. Using 1/8-inch drive pin punch
a. Turn gear (3) over.
(Item 26) and hammer, remove and
b. Using screwdriver, pry out internal
discard bearing (2).
snap ring (4).
b. Replace gear (3) if damaged.
4-48
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals