 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
6. REMOVE SPRING (1) AND TWO
HELlCAL SPRINGS (2).
a.
Unhook and remove spring (1).
b.
Unhook outer ends of each spring (2)
from two pins (3).
c.
Unhook and remove inner ends of
each spring (2) from steering arm (4).
Discard springs (2).
d.
Remove steering arm (4) from punch.
8. CHECK STEERING ARM (4).
a. Using indicator caliper, measure
distance (5) between edges (6).
b. Replace steering arm (4) if
measurement is greater than
2.406 inches (61.11 mm).
9. CLEAN STEERING ARM ASSEMBLY.
a. Clean assembly and hardware. See
7. INSPECT STEERING ARM (4) FOR
10. INSPECT STEERING ARM ASSEMBLY.
CRACKS IN BRAZE JOINTS AND
SURFACE DAMAGE.
a. Inspect assembly and hardware. See
a. Replace steering arm (4) if damaged.
3-48
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals