REPAIRER AND HELPER POSITION UPPER CONTAINER

TM 9-2520-270-34

WARNING

Hanging loads could kill or

injure you. Keep away from

hanging loads and overhead

equipment.

NOTE

The lower container has one dowel pin to help

aline screw holes in the two container halves.

The upper half of container will go on only in

one direction.

12. REPAIRER AND HELPER POSITION

UPPER CONTAINER (1) ON LOWER

CONTAINER (2).

Using lifting device (3), position upper

container (1) over lower container (2).

(H) Aline pin (4) in lower container (2)

with hole in upper container (1).

Using lifting device (3) place upper

container (1) onto lower container (2)

and aline 20 holes (5).

13 SECURE UPPER CONTAINER (1) TO

LOWER CONTAINER (2).

15. REPAIRER AND HELPER REMOVE

a. Install 20 washers (6), screws (7),

LIFTING DEVICE (3) AND SLING (9).

washers (6), and self-locking nuts (8).

a. Remove sling (9) from lifting

points (10) and (11).

14. U S I N G 1/2-lNCH DRIVE TORQUE

b. Remove sling (9) from lifting

WRENCH, TORQUE 20 SCREWS (7)

device (3).

AND NUTS (8) TO 55-60 ft-lb (8 mkg).

GO TO NEXT PAGE

2-163