USING THE INSPECTION TREE-continued

TM 9-2520-270-34

H O W TO USE THIS MANUAL (cont)

Now you are ready to begin the inspection tree. Read

the note carefully before starting. Look at the

first block. Read step 1, which directs you to

disassemble the transmission. Perform

the DISASSEMBLE portion of the referenced

task, INSPECT TRANSMISSION FOR

CONTAMINATION, which starts on page 4-67. Return

to this block when you have done step 1.

Step 2 is a question that you must answer YES or NO. The answer depends on what you found when

you did step 1. For the purpose of this sample, you did not find any contamination. The answer to the

question IS TRANSMISSION CONTAMINATED? is NO. Follow the NO arrow to the referenced

letter A . F o l l o w the referenced letter A

to the next page.

NOTE

When directed to perform corrective actions, record necessary tasks on DA Form 2404 in

accordance with DA PAM 738-750. Do not make any corrective actions or repairs until directed

to do so at end of tree.

TRANSMISSION CREEP

DISASSEMBLE TRANSMISSION See task INSPECT

TRANSMISSION FOR CONTAMINATION, page 4-67

2 IS TRANSMISSION CONTAMINATED?

YES

Corrective action

DISASSEMBLE AND CLEAN MAIN

HOUSING See task CLEAN MAIN

HOUSING ASSEMBLY. page 4-155

GO TO NEXT PAGE

Change 1

2-30

Change 1