Install two external-tanged plates

Turn assembly over, and position output shaft

through hole in table. Install low-range apply plate

(A), and alternately install three internal-splined

(B) and three external-tanged plates (C). Install

intermediate-range planetary carrier (D) and snap

Install two external-tanged plates (A) and two

ring (E).

intern al-splined plates (B). Install intermediate-

range reaction plate assembly (C) with notch (D)

alined with notch (E).

I n s t a l l compressor assembly 4910-572-8643

Install intermediate-range piston housing assembly

(8356187) (A), to compress low-range (B) and

(A), apply plate (B), one internal-splined plate (C),

intermediate-range c l u t c h springs (C). When

and intermediate-range r i n g gear (D). Note

properly assembled and compressed, there will be

alinement of clutch apply oil hole (E) with anchor

no clearance (opening) at points (D) and (E).

pin slot (F).