Remove 17 long bolts

Remove 17 long bolts (A) and lockwashers.

Remove two short bolts (B) and lock washers.

Remove six snap rings (A) securing six small

jumper tubes.

Note. Snap rings are not in grooves, merely snug

in bore.

Remove oil transfer plate assembly (A) and rear

pump check ball (B).

Using a 5/16 bolt (A) threaded into jumper tubes

(B), remove 6 jumper tubes (B) and 12 seal rings

(C), and remove seal rings from jumper tubes.

Remove one large jumper tube (D) and two seal

rings, and remove seal rings from jumper tube.