Remove right cross shaft bearing retainer assembly

TM 9-2520-249-34& P

NOTE

Before removing the shims, identify any

one bolt hole in the housing with a

corresponding hole in the shims for proper

indexing during assembly.

95 Using three of the bolts removed as jackscrews (1),

loosen right bearing retainer assembly (2).

Remove

cross shaft and bevel driven gear

assembly, working it out through the right side of

bevel gear housing (2). Remove rope sling (3).

96.

Remove right cross shaft bearing

retainer

assembly (1). Remove the jackscrews. Remove

shims (2). Tie them together and identify them as to

location, to prevent loss or confusion with other

shims. Record the thickness of the shim pack.

6-27