 |
|||
|
|
|||
|
Page Title:
Remove brake apply rotating cam |
|
||
| ||||||||||
|
|
 TM 9-2520-249-34& P
58 Remove brake apply rotating cam (1) and let
60 Remove snapring (1) and splined spacer (2)
the 12 steel balls fall into the container. Using a
which retain reverse-range planetary carrier
9/ 16-inch wrench, remove 16 self-locking bolts
assembly (3).
Remove the reverse-range
(2) and plain washers from brake stationary cam
planetary carrier assembly. Remove two seal
13).
rings from the carrier hub.
59 Remove brake stationary cam (1). Eight anchor
pins (2) will be loose when the cam is removed
61 Using a 1/2-inch socket wrench, remove four
and some may come out with the cam.
self-locking bolts (1) and plain washers from
Remove these pins from the cam. Remove the
retainer assembly (2).
remaining anchor pins. Remove 12 springs (3).
Remove six steel clutch disks (4) and six
bronze-faced clutch disks (5). Remove reverse
range clutch apply disk (6) with the coolant
valve attached.
6-17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals