 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-238-34
REPAIR HYDRAULIC MASTER BRAKE CYLINDER -- Continued
0031 00
7.
Insert screwdriver through opening in housing (1) and apply enough pressure to keep assembled parts in place.
8.
Install new end plug seal (2), new gasket (3), new spring, (4) new check valve (5), and new check valve seat (6) in
housing (1). Secure end plug (7). Tighten plug to 80-95 lb-ft (108-129 Nm) torque. Use torque wrench (WP 0033 00,
Item 42).
9.
Install metering needle (8) in relief valve (9). Secure with new relief valve disk (10), new spring (11), and new cotter
pin (12).
10. Install piston (13) and spring (14) in relief valve (9).
11. Install adjusting screw (15) until one screw thread shows in relief valve (9).
12. Install new gasket (16) and relief valve (9) on housing (1). Tighten relief valve to 204-240 lb-in (23-27 N.m) torque.
Use torque wrench (WP 0033 00, Item 41) and face wrench socket (17).
0031 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals