 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-238-34
REPLACE DIFFERENTIAL RIGHT ANGLE GEARBOX -- Continued
0027 00
REMOVAL
1.
Remove right angle gearbox (1) from housing (2) as follows. Remove 11 cap screws (3) and washers (4) holding
gearbox (1) to housing (2). Remove loop clamp (5) and hose (6) from gearbox.
2.
Remove hose (6) from adapter (7).
3.
Install two cap screws (3) in threaded jack screw holes, and tighten screws uniformly to separate gearbox (1) from
housing (2). Remove cap screws. Remove packing (8) from gearbox and discard packing. Remove thrust washer (9)
from steering unit assembly (10).
CLEANING
CLEAN, INSPECT, AND REPLACE
1.
Clean all parts, and check for cracks, wear, and damage. Replace if needed.
0027 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals