 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-238-34
REPLACE OUTPUT SHAFT ASSEMBLIES -- Continued
0023 00
REMOVAL
WARNING
Parts of the brake assembly may be coated with asbestos dust. Breathing this dust can harm
personnel. Use a filter mask approved for use against asbestos dust. Never use compressed air
or dry brush to clean these assemblies. Use an industrial type vacuum cleaner with a
high-efficiency filter system to remove dust. Use water and a soft bristle brush or cloth to
remove dirt or mud.
CAUTION
Use care in handling and disassembly to protect machined surfaces and bearings from damage.
Provide safe blockage arrangement at work station and place output shaft assemblies in
convenient position for disassembly.
NOTE
Left and right brake adapter are removed and installed in the same manner.
1.
Remove four locknuts (1) and adapter (2) from differential output shaft. Discard locknuts.
0023 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals