 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-238-34
REPLACE STRAIGHT ADAPTER AND BRAKE SHOE ASSEMBLIES -- Continued
0021 00
REMOVAL
WARNING
Parts of the brake assembly may be coated with asbestos dust. Breathing this dust can harm
personnel. Use a filter mask approved for use against asbestos dust. Never use compressed air
or dry brush to clean these assemblies. Use an industrial type vacuum cleaner with a
high-efficiency filter system to remove dust. Use water and a soft bristle brush or cloth to
remove dirt or mud.
CAUTION
Take care during handling and disassembly to protect machined surfaces, gears, bearings, and
components from damage. Provide safe blockage arrangement.
1.
Drain differential oil into suitable container (see your PMCS).
2.
Remove dipstick (1) and breather (2) from differential (3).
3.
Remove locknut (4), screw (5), clamp (6), and clamp (7). Separate differential oil hose (8) from circuit 328 lead (9).
Discard locknut.
4.
Remove screw (10), washer (11), clamp (12) and oil hose (8) from differential gearbox (13).
5.
Disconnect oil hose (8) from elbow (14) and elbow (15).
6.
Remove elbow (15) from adapter (16).
7.
Remove elbow (14) from differential gearbox (13).
0021 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals