Remove helical gearshaft cluster

TM 9-2520-238-34

REPAIR TRANSFER GEARCASE F -- Continued

0019 00

NOTE

Do not remove tapered roller bearing cones or cups that are pressed in plates unless inspection

indicates a replacement is needed.

25. Remove output gear (1) from gearcase housing (2). Separate bearing cone (3) and bearing cone (4) from gear.

26. Remove helical gearshaft cluster (5) as an assembly from housing (2). Separate bearing cone (6) and bearing cone(7)

from cluster. If replacement is needed, use brass drift pin and hammer to remove spring pin (8). Separate second

intermediate gear (9) from primary pump-drive gear (10). Discard spring pin.

27. Remove first intermediate gear (11) from housing (2). Separate bearing cone (12) and bearing cone (13) from gear.

0019 00-10