Straighten tabs on four key washers

TM 9-2520-238-34

REPAIR TRANSFER GEARCASE F -- Continued

0019 00

20. Straighten tabs on four key washers (19). Remove four cap screws (20), key washers, and retaining plate (21) from cover

(8). Remove laminated shim (22) and packing (23) from retaining plate. Discard packing, shim, and key washers.

NOTE

Do not remove roller bearing cups that are pressed in retaining plates unless inspection

indicates a replacement is needed.

21. If needed, remove bearing cup(s) in retaining plate (7), retaining plate (16), retaining plate (21), or retaining plate (24)

with mechanical puller kit. Discard cup(s).

0019 00-7