Straighten tabs on four key washers

TM 9-2520-238-34

REPAIR TRANSFER GEARCASE F -- Continued

0019 00

17. Remove cap screw (1), washer (2), fan drive pulley (3), and machine key (4) from first intermediate gear shaft.

18. Straighten tabs on four key washers (5). Remove four cap screws (6), key washers, and retaining plate (7) from cover (8).

Remove encased oil seal (9), packing retainer (10), preformed packing (11), laminated shim (12), and packing (13) from

retaining plate. Discard packings, oil seal, shim, and key washers.

19. Straighten tabs on four key washers (14). Remove four cap screws (15), key washers, and retaining plate (16) from cover

(8). Remove laminated shim (17) and packing (18) from retaining plate. Discard packing, shim, and key washers.

0019 00-6