 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-238-34
REPLACE TRANSFER GEARCASE A, B, OR C WITH SERVICE SPARE TRANSFER
0018 00
GEARCASE E -- Continued
ASSEMBLY
CAUTION
To prevent damage to encased oil seal, do not press seal beyond face of bore. After installation,
seal must be flush with outer surface.
NOTE
Steps 1 - 12 apply to service spare transfer gearcase E.
1.
Clean mating surface of encased oil seal (9). Apply a shim film of sealing compound on outer edge of seal. Install seal in
retainer (3).
2.
Install three-grooved pulley (8) on retainer (3) with new retaining ring (7).
3.
Lubricate new packing (4) with grease. Install packing on retainer (3).
4.
Apply antiseize compound to threads of four clean cap screws (2) at installation. Install laminated shim (5), packing (4),
and retainer (3) on cover (6) with four new key washers (1) and cap screws. Tighten screws to 144-180 lb-in (17-20 Nm)
torque. Use torque wrench (WP 0033 00, Item 41). Bend tabs on key washers.
0018 00-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals