DISASSEMBLY-continued - TM-9-2520-238-340119

TM 9-2520-238-34

REPAIR TRANSFER GEARCASES A, B, AND C -- Continued

0017 00

12. Remove cotter pin (1), slotted nut (2), and one or two washers (3) securing differential oil pump to secondary pump

drive-gear. Discard cotter pin. Straighten tabs on two key washers (4). Remove two cap screws (5), key washers (4) and

differential oil pump (6). Remove and discard machine key (7) and gasket (8).

13. If pump (6) is to be replaced, remove retaining ring (9) from shaft of pump. Discard retaining ring.

14. Remove and discard solid rivet (10) holding filler neck (11) in housing (12). Remove filler neck. Remove two helical

springs (13) and spring pin (14) holding cap to filler cap head. Discard pin. Remove and discard packing (15).

NOTE

This is an internal gear and is not

removed here. This is only shown

as a reference for the pump installation.

0017 00-5