Install new oil seal

TM 9-2520-238-34

REPAIR COOLING FAN RIGHT ANGLE DRIVE C (M113A3 FOV ONLY) -- Continued

0016 00

12. Install sleeve spacer (1) on shaft and bearing (2).

13. Press bearing sleeve (3) into ball bearing (4) and install ball bearing into bearing retaining plate (5). Use arbor press.

CAUTION

To prevent damage to oil seal, do not press seal beyond face of bore. After installation seal must

be flush with outer surface.

14. Lubricate new packing (6) and new packing (7) with grease or petrolatum. Install packings in bearing retaining plate (5).

15. Install new oil seal (8) and oil seal (9) into oil seal retainer (10) and oil seal retainer (11) as follows:

Clean mating surfaces of oil seal (8), oil seal (9), oil seal retainer (10), and oil seal retainer (11). Apply a thin film

of sealing compound (WP 0035 00, Item 12) or (WP 0035 00, Item 15) to outer edge of oil seals.

Press oil seal (8) and oil seal (9) into retainer (10) and retainer (11). Use arbor press.

0016 00-13