 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-238-34
REPAIR COOLING FAN RIGHT ANGLE DRIVES A AND B -- Continued
0015 00
22. Install spindle assembly (6) in housing (4) as follows:
a.
Clean threads of four cap screws (7). Apply a light coat of antiseize compound to threads.
b.
Install laminated shim (8), spindle assembly (6), laminated shim (9), and bearing retainer housing (2) on housing
(4). Secure with four key washers (10) and cap screws (7).
c.
Tighten four cap screws (7) to 144-180 lb-in (17-20 Nm) torque. Use torque wrench and socket set.
d.
Bend tabs on four key washers (10).
23. Preserve drive as follows:
a.
Fill drive with 5 ounces of engine oil. Check for leaks. See your (WP 0014 00).
b.
Drain oil. Leave residual oil as preservative during shipping or storage.
24. Install pipe plug (11) in housing (4) as follows:
a.
Clean male pipe threads thoroughly. Apply sealing compound to pipe threads. Do not apply sealant beyond small
end of threads. Do not fill leading thread.
b.
Install plug (11) in housing (4).
0015 00-18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals