Section I. INTRODUCTION - TM-9-2350-287-24P0014

TM 9-2350-287-24P

UNIT, DIRECT SUPPORT, AND

GENERAL SUPPORT MAINTENANCE

REPAIR PARTS AND SPECIAL TOOLS LIST

Section I. INTRODUCTION

SCOPE.

This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic

equipment (TMDE); and other special support equipment required for performance of organizational, direct support, and

general support maintenance of the M992A1 Carrier, Ammunition, Tracked. It authorizes the requisitioning, issue, and

disposition of spares, repair parts, and special tools as indicated by the source, maintenance, and recoverability (SMR)

codes.

GENERAL.

In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following sections:

a. Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the performance

of maintenance. The list also includes parts which must be removed for replacement of the authorized parts.

Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group

listed in ascending figure and item number sequence. Bulk materiels are listed in item name sequence. Repair

parts kits are listed separately in their own functional group within Section II.

b. Section III. Special Tools List. A list of special tools, special TMDE, and other special support equipment

authorized by this RPSTL for the performance of maintenance.

c. Section IV. Cross-reference Index. A list, in National Item Identification Number (NIIN) sequence, of all National

stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all part numbers

appearing in the listings. National stock numbers and part numbers are crossreferenced to each illustration/figure

and item number appearance. The figure and item number index lists figure and item numbers in alphanumeric

sequence and cross-references NSN, CAGE, and part numbers. A list of ordinance part numbers cross-

referenced to BMY part numbers.

EXPLANATION OF COLUMNS (SECTIONS II AND III).

a. ITEM NO. [Column (1)]. Indicates the number used to identify items called out in the illustration.

b. SMR CODE [Column (2)]. The Source, Maintenance, and Recoverability (SMR) code is a 5-position code

containing supply/requisitioning information, maintenance category authorization criteria, and disposition

instruction, as shown in the following breakout:

*Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the "Repair" function

in a use/user environment in order to restore serviceability to a failed item.