Appendix C. ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST

TM 55-8145-203-13&P

ORGANIZATIONAL, DIRECT SUPPORT, AND

GENERAL SUPPORT MAINTENANCE

REPAIR PARTS AND SPECIAL TOOLS LIST

SECTION I. INTRODUCTION

C-1 SCOPE.

This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic equipment

(TMDE); and other special support equipment required for performance of organizational, direct support, and general support

maintenance of the Tricon Container. It authorizes the requisitioning, issue, and disposition of spares, repair parts and special

tools as indicated by the source, maintenance and recoverability (SMR) codes.

C-2 GENERAL.

In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following sections:

C-2.1 Section II - Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the performance of

maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed

of functional groups in ascending alphanumeric sequence, with the parts in each group listed in ascending figure and item number

sequence. Bulk materials are listed by item name in FIG BULK at the end of the section. Repair parts kits or sets are listed

separately in their own functional group within Section II. Repair parts for repairable special tools are also listed in the section.

C-2.2 Section III - Special Tools List. A list of special tools, special TMDE, and other special support equipment authorized by

this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE ON CODE (UOC) column) for

the performance of maintenance.

C-2.3 Section IV - National Stock Number and Part Number Index. A list, in National item identification number (NIIN)

sequence, of all National stock numbered items appearing in the listings, followed by a list in alphanumeric sequence of all part

numbers appearing in the listing. National stock numbers and part numbers are cross-referenced to each illustration figure and

item number appearance.

C-3 EXPLANATION OF COLUMNS (SECTIONS II AND III).

C-3.1 ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.

C-3.2 SMR CODE (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code containing

supply/requisitioning information, maintenance category authorization criteria, and disposition instruction, as shown in the

following breakout:

C-1