Fixtures - Water Feed Thru Connector - Replace

3-14. Fixtures - Water Feed Thru Connector - Replace

3-14

This task covers: Replacement of connector

INITIAL SETUP

Tools:

Personnel Required:

Knife, Putty

67W Aircraft Quality Control Supervisor and Helper

Handle, socket wrench, 3/8" drive

67Z Aircraft Maintenance Senior Sergeant

Socket, socket wrench, 3/8" drive, 3/8"

Screwdriver, cross tip

Materiel:

New feed thru connector - App E

Adhesive, Sealant NSN 8040-00-877-9872

REPLACEMENT

1. Have helper hold nut (1) inside shelter.

2. Remove six screws (2), securing connector (3)

in place.

3. Remove connector (3) from wall and scrape off

old sealant (4).

GO TO NEXT PAGE

3-16