4. Install three special retainer screws (4) thru
bottom bar (5) into face of ECU (3) and tighten.
Repeat steps 1 thru 4 with other ECU.
2-4. Safeguarding bolts and washers.
Care must be taken to ensure that the
2-5. Electric power.
proper bolts and washers are
available to secure equipment when
shop is to be transported. Lack of
HIGH VOLTAGE exists in the
extensive damage to equipment or
electrical system of the shop. All
the shelter when the shop is moved.
electrical inspections, repairs or
replacement will be performed with
All bolts and washers removed from equipment will
the power off and only by qualified
be collected and placed in cotton mailing bags (see item
electricians. Serious shock hazards
2, App D). Bags are kept in the shop storage chest for
exist which could result in injury or
safekeeping until shelter is to be moved and equipment
even death to personnel.
rebolted to the floor.
Main power cable connection.
1. Remove rolled up power cable (1) from
storage bin (2) in shop.
|Integrated Publishing, Inc.|