TM 55-4920-433-13&P
WARNING
When all equipment and materiel is stored on the stationary side of the shelter, the limited floor
space presents a safety hazard to operating personnel. This is most critical during the raising
and lowering of the roof panel. Failure to observe supplemental instructions could result in
serious injury to personnel. Personnel inside the shelter could become trapped between the roof
panel and equipment bolted to the floor.
c. Two people inside the shelter, using the
support struts (1), will lower the roof panel (2) until two
personnel outside can reach and hold the weight of the
roof.
d. Inside personnel will shorten the struts (1)
and secure to roof brackets (3). They will then move
into position to assist outside personnel.
e. After all inside personnel are clear allow
the roof panel (2) to close to the vertical position.
f. After shelter has been folded as detailed in steps (a) thru (e) and prepared in accordance with TM 10-5411-201-
14, the Pneudraulic Shop is ready for transport or storage.
Change 1 2-33/(2-34 blank)