TM 55-4920-433-13&P
2-6. Other shop utilities.
In addition to electrical power the shop is provided with connections for compressed air and water.
a. Compressed air connection.
1. Remove protective dust cap (1) from air
inlet nipple (2) at the service utility panel (3). Store in
shop storage chest.
2. From storage chest remove a quick
disconnect coupling (4).
3. Install the quick disconnect coupling (4)
on air inlet nipple (2).
4. Tighten coupling (4) securely.
b. Water supply connection.
NOTE
When water is to be supplied to
shelter proceed as follows.
1. Remove protective dust cap (1) from each
end of water feed thru connector (2).
2. Install adapters and fittings as required.
NOTE
Reposition
storage
chest
in
mounting bracket when no longer
required.
Change 1
2-18.1/(2-18.2)