FLYWHEEL REPLACE Continued
Place woodruff key in crankshaft.
Install flywheel on crankshaft. Make sure the key way in the flywheel is lined up with the woodruff
Install Iockwasher and nut on crankshaft. Tighten nut, using 1-½ inch socket.
Install crankshaft extension on flywheel.
Install six bolts through Iockwasher and crankshaft extension into flywheel. Tighten the bolts.
Install bushing in pulley.
Install bushing and pulley on crankshaft. Locate pulley 2-¼ inches from end of crankshaft.
Secure bushing and pulley to crankshaft. Tighten two screws on bushing.
Install flywheel screen on flywheel baffling and secure with eight screws,
Place square key on crankshaft.
Install fan on crankshaft. Make sure the keyway in the fan is lined up with the square key and flush.
with end of crankshaft.
Install two setscrews securing fan to crankshaft. Tighten setscrews.
Install oil cooler (Para. 3-116).
END OF TASK