WIRING AND CABLES REPLACE
This task covers:
Wiring and cables
68F Instrument Repairman
Kit, NSN 5180-00-323-4913
Install wiring harness. Install the plug into the receptacle on the gage panel box, replace the plug to
the differential pressure switch, the high temperature shut-off switch, the magneto, the high pressure
filter and the alternator.
Install the sender wire on the fuel tank and secure with screws.
Install the sender wire on the hydrualic oil reservoir and secure with screw.
Install wires on solenoid and secure with washers and nuts.
Stretch the harness along the large return line from the flowmeter and outlet supply line.
Secure harness in place with cable ties.
Install access panels.
END OF TASK