FLUID RESERVOIR REPLACE Continued
Position reservoir under test stand fender.
Align holes in reservoir with holes in fender.
Install eight bolts and flatwashers.
Install eight Iockwashers and nuts on bolts and tighten.
Install new "O" rings on the two elbows.
Install two elbows. Tighten.
Align elbow with hydraulic tubing and tighten the bottom nut on the elbow. Use 1-½ inch open end
Install tubing nuts on elbows and tighten nut, using 1-½ inch open end wrench.
Install sender wire.
Service with hydraulic fluid, MIL-H-5606.
Install access panel.
END OF TASK