LOW PRESSURE RELIEF VALVE REMOVE
This task covers:
Kit, NSN 5180-00-323-4891
68H Aircraft Pneudraulic
1-¼ in. open end wrench
1-½ in. open end wrench
Remove access panel.
Disconnect hose from the filter to the valve. Use 1-½ inch open end wrench.
Remove nut on the tubing to the boost pump. Use 1-½ inch open end wrench.
Remove nut on the hose from the reservoir selector valve. Use 1-½ inch open end wrench.
Remove nut on the tubing from the oil cooler to valve, Use 1-¼ inch open end wrench.
Remove nut (2 places) on the gage line hoses.
Remove bolts, Iockwasher and flatwasher securing valve to motor mount.
Remove valve and spacer.
GO TO NEXT PAGE