THREE-WAY FLOW CONTROL VALVE REMOVE Continued
Loosen nut on inlet tubing. Use 1-¼ inch open end wrench.
Loosen nut on outlet tubing. Use 1-¼ inch open end wrench.
Loosen nut on bypass tubing. Use 1-½ inch open end wrench.
Remove bolt and washer on the valve handle.
Reinstall bolt and washer to hold positioning washer in place.
Remove two hex head screws and washers.
Remove inlet tubing nut from the valve.
Remove outlet tubing nut from the valve.
Remove bypass tubing nut from the valve.
Remove three-way flow control valve.
END OF TASK