ALTERNATOR REPLACE Continued
Support alternator and install bolt and flatwasher through mount and alternator with the head of the bolt
toward the engine.
Install flatwasher, Iockwasher and nut onto the bolt. Tighten nut finger tight.
Install "V" belt onto pulley.
Install screw through Iockwasher, flatwasher, tension bar and screw into alternator. Snug up the screw,
put tension on the alternator tightening the "V" belt so that it can be deflected no more than approx-
imately ¼ inch. Tighten screw.
Tighten nut a minimum of one turn.
Connect the disconnect plug.
Install access panel.
END OF TASK