HANDBRAKE, ROD ASSEMBLY REPLACE Continued
Secure the two levers with a bolt and a nut, after placing on the knurled mount.
Install Iockwasher and nut at each end of end rod, securing rod to the levers.
Install one end of center rod to the end rod and install flatwasher and nut.
Screw the clevis onto the other end (handbrake handle end) of the center rod.
Install the handbrake handle to the test stand frame, securing with two bolts, Iockwashers and nuts.
Gently drive the straight pin through the handbrake bracket holes and the clevis mounting holes, and
secure the handbrake handle assembly in place with a washer and cotter pin.
END OF TASK