This task covers:
68H Aircraft Pneudraulic
Kit, NSN 5180-00-323-4876
Spring-Part Number 20050-8
Install two spring supports into spring.
Replace spring assembly on the axle.
Lower jack slowly and apply a small amount of tension to the spring.
Insert the spring support rod through the axle, spring support, spring, spring support and into the
test stand frame.
Lower the jack completely to allow rod to extend through test stand frame.
Install the top nut and washer, tighten the top nut until a minimum of two threads are showing.
Raise axle and remove jack stand,
Lower jack and remove.
END OF TASK