TIE RODS AND TIE BARS REPLACE
This task covers:
Rods and bars removed
68H Aircraft Pneudraulic
Tie rod (L), Part Number ES416L
Kit, NSN 5180-00-323-4891
Tie rod (R), Part Number ES416R
Tie bar, Part Number 23008-1
Grease Fitting, Part Number MS 15003-1
Replace nut on tie rod.
Install two tie rods to two tie bars.
Adjust the distance between tie rod ends. Refer to distance recorded prior to disassembly.
Tighten tie bar nut to the tie bar.
Replace two grease boots.
Replace tie bar assembly to axle and tongue.
Replace two castellated nuts on tie rods.
Tighten two castellated nuts until the holes in the tie rods line up with the slots in the nuts.
Replace cotter pin, bend cotter pin ends.
Replace grease fitting.
END OF TASK