Chapter 3. AVIATION UNIT MAINTENANCE INSTRUCTIONS

TM 55-4920-426-13&P

CHAPTER 3

AVIATION UNIT MAINTENANCE INSTRUCTIONS

REPAIR PARTS, SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT

Section 1.

3-1

3-1 COMMON TOOLS AND EQUIPMENT

For authorized common tools and equipment refer to the Modified Table of Organization and Equipment

(MTOE) applicable to your unit.

3-2 REPAIR PARTS

3-2

Repair parts are listed in Appendix C.

3-3 SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT

3-3

No special tools or equipment are required.

Section IL SERVICE UPON RECEIPT

3-4 UNPACKAGING AND INSTALLATION

3-4

The test stand is shipped completely assembled on fully inflated tires and requires no major assembly of

components prior to preparing the stand for use other than the following:

Check the data on the test stand nameplate to verify it is the unit designated on the cover sheet

of this manual.

Carefully inspect the complete test stand for any possible damage which may have occurred dur-

ing shipment.

Open the instrument panel door located at the rear of the test stand, inspect for damaged,

broken gages or instruments.

Check that all manually operated switches and controls operate freely.

Remove the hose assemblies from inside the recess area at the front of the test stand. Inspect

the hose for evidence of damage, breaks, or loose fittings.

3-1