PRE-STARTING INSPECTION.

TM 55-4920-416-13

Section III

NAVAER 17-15C-539

Paragraphs 3-8 to 3-11

3-8.

PRE-STARTING INSPECTION.

For pre-starting

3-10. MAINTENANCE IN STORAGE. Units may be stored

indefinitely without harm after the procedures in paragraph 3-9

handbook.

are followed. When units are stored in humid areas, they are

to be packaged in accordance with Specification MIL-P-116B,

3-9. PREPARATION FOR STORAGE AND SHIPMENT. The

method 2B. Every thirty days the humidity indicator must be

following special procedures are required prior to shipment or

checked and four desiccant bags replaced if indicator shows

storage.

need for replacement.

a. Drain reservoir (refer to paragraph 3-7).

b. Clean and replace vacuum and pressure sump bowls

3-11. SHIPMENT. For detailed procedures for packaging for

and filters, if necessary (refer to Section V, paragraph 5-20).

shipment, refer to Specification MIL-P-116B, method 2B.

Reservoir

Vacuum and Pressure

Drain-fill Valve

Control Valves

Drain-fill Hose

Vacuum and Pressure

Power Receptacle

Selector Valves

Figure 3-1. Oil Reservoir