 |
|||
|
|
|||
|
Page Title:
Disassembly of Capacitance Assembly. |
|
||
| ||||||||||
|
|
 TM 55-4920-325-14&P
(6) Indicator test cable.
sembly of capacitance assembly (32) and to para-
graph 4-10 for disassembly of panel assembly
(7) Two break-in cables.
(33).
(8) Five tee connectors.
Remove four screws (34) and four lock-
u. Remove four screws (41), four lock-
washers (35) and detach two support rods (36)
washers (42) and four flat washers (43) and de-
from vibration isolators (40).
tach two cable supports (44) from lid of transit
case assembly (52).
transit case assembly (52) by removing 16 ma-
v. Remove four screws (45), four lock-
chine screws (37), 16 Iockwashers (38) and 16 hex
washers (46) and four acorn cap nuts (47) and de-
nuts (39).
tach identification plate (48) from transit case as-
Remove three power cable assemblies
sembly (52).
from lid of transit case assembly (52).
Remove instruction placard (49) from tran-
t. Remove the following cables and acces-
sit case assembly (52).
sories from cable storage compartment of transit
Remove two screws (50) and detach two
case assembly (52):
clamps (51) from panel assembly (33).
(1) Main cable assembly.
4-9. Disassembly of Capacitance Assembly.
(2) Twelve (12) adapter cable assem-
blies.
To disassemble the capacitance assembly, refer
to figure 4-11 and proceed as follows:
(3) Seven BNC connector cable assem-
blies.
NOTE
(4) Ground lead assembly.
As disassembly proceeds, tag and dis-
connect wiring as required.
(5) Test lead assembly.
28. Shouldered shaft
KEY to fig. 4-11:
29. O-ring seal
30. Screw
1.
Screw
31. Pan head screw
2.
Shield plate
32. Lockwasher
Screw
3.
33. Simulator bracket
Hex nut
4.
34. Pan head screw
Lockwasher
5.
35. Hex nut
6.
Shield bracket
36. Flat washer
Pan head screw
7.
37. Lockwasher
Insulating washer
8.
38. Nylon clamp
Flat washer
9.
39. Hex nut
10.
Bracket assembly
40. Washer
11.
Screw
41. Rotary switch S401
12.
Simulator shield
42. Hex nut
13.
Screw
43. Washer
14.
Screw
44. Rotary switch S402
15.
Capacitance simulator assembly
45. Hex nut
Pan head screws
16.
46. Washer
17.
Flat washer
47. Rotary switch S403
Lockwasher
18.
Nylon clamp
48. Pan head screw
19.
Nylon clamp
20.
49. Lockwasher
50. Solder lug
Pan head screw
21.
51. Connector J401
Teflon bushing
22.
52. Connector J402
Washer
23.
53. Connector J403
Flat washer
24.
54. Hex nut
25.
Capacitor assembly C401
55. Panel bushing
26.
Capacitor assembly C402
56. Simulator chassis
Retaining ring
27.
4-15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals