Section Il. INSTALLATION

TM 55-4920-325-14&P

Section Il. INSTALLATION

3-5. Installation Requirements.

The test set does not require any special in-

stallation instructions. The unit may be placed on

a maintenance area work bench. The bench must

contain facilities for furnishing the required ac op-

erating power (see table 1-1).

Section Ill. INSPECTIONS AND SERVICING

3-6. Inspection Requirements.

c. Intermediate Inspection. The intermediate

Table 3-1 contains the requirements to com-

inspection is a combination of daily and inter-

plete daily, intermediate, periodic, and special in-

mediate inspection requirements for checking the

spections as applicable to the test set. These in-

test set that requires verification of normal oper-

spections must be accomplished at the specified

ation at frequencies between the daily and

periods by organizational maintenance activities

periodic inspections. intermediate inspection is

to assure that ail defects are discovered and cor-

accomplished every 25 to 30 hours of operation. it

rected before a malfunction or serious trouble

is intended that evidence of progressive inefficient

occurs.

operation or abnormal conditions be discovered

NOTE

during this inspection. This will preclude a pro-

All inspections required at each oper-

gression of discrepancies that will result in a ma-

ation shall be reaccomplished during

jor maintenance action required to remedy the de-

ficiencies.

daily, intermediate, and periodic in-

spections. All daily inspections shall be

d . Periodic Inspection. The periodic in-

reaccomplished during intermediate

spection is a thorough and searching inspection

a n d periodic inspections. All inter-

of those items subject to failure or discrepancy.

mediate inspections shall be r e a c -

Periodic inspection is accomplished every 100 to

complished during periodic inspections.

120 hours of operation.

e. Special Inspection. The special inspection

a. Each Operation. Every time the test set is

is a series of tests to determine the cause of fail-

operated the inspections noted in this column

ure. Special inspections are not required at the

shall be performed.

organizational Ievel.

b. Daily Inspection. The daily inspection is

3-7. Servicing.

accomplished following the last operation of the

day, or preceding the next day's operation. Daily

The test set does not require any servicing be-

inspection requirements consist of visual exam-

yond the inspection requirements contained in

ination and operational checks to insure that the

paragraph 3-6 at the organizational level.

test set can safely and efficiently perform its as-

signed mission.

3-3