Chapter 3. Organizational Maintenance Instructions

TM 55-4920-325-14&P

CHAPTER

ORGANIZATIONAL

MAINTENANCE

INSTRUCTIONS

S e c t i o n I. PREPARATION FOR INSTALLATION, STORAGE

AND SHIPMENT

b. Check for cracked or shattered glass.

3-1. Preparation for Installation.

CAUTION

c. Check all cables and accessories for ev-

idence of damage.

Care should be exercised when moving

the test set. The test set contains elec-

d. Check the equipment received against the

tronic and electro-mechanical com-

master shipping list making certain that all the

ponents and assembles which may be

materials have been received.

damaged if improperly handled.

e. Check that all packing materials, dust, or

The test set is shipped as a single, self-con-

other foreign matter has been removed from the

test set. Pay particular attention to points of elec-

tained unit, integrally housed in a combination

trical contact.

case. No special instructions are required to un-

pack and prepare the test set for use. Provision, at

f. Report any irregularities and/or damage to

the using site, must be made to meet at least the

the responsible activity.

minimum requirements listed below:

3-3. Preparation for Storage.

Adequate lighting and ventilation.

The method of storage of the test set is the

b . Provision for the power requirements

same as that specified for reshipment. Refer to

stated in table 1-1.

paragraph 3-4 for reshipment instructions.

3-2 Equipment Inspection on Delivery.

3-4. Preparation for Reshipment.

When the test set is received, inspect the test

Preservation, packaging, packing, and marking

set for possible damage in transit. Report ev-

requirements for reshipment of the test set must

idence of damage immediately as required. A vi-

be in accordance with the instructions contained

sual inspection of the equipment should include

in figure 3-1.

the following as a minimum:

a. Check for dented or sprung covers or oth-

er visible signs of external damage.

3-1