Figure 3-38. Bearings, Retainers, and Front Cover, Installation.

TM 55-1930-208-24

(23) Install retaining bolt (6) and torque bolt to 18 lb-ft (24 Nm).

(24) Install gasket (7) and front cover (8) into position.

(25) Install ten washers (9) and ten bolts (10). Torque bolts to 13-17 lb-ft (18-23 Nm).

Figure 3-38. Bearings, Retainers, and Front Cover, Installation.

(26) Refer to figure 3-39 and lubricate bearings (1) with lubricating oil (item 12, Appendix C).

(27) Place bearing (1) number side up on the shaft. Seat the bearing with a bearing driver J6270-4.

(28) Install retainer (2), three washers (3), and three screws (4). Torque screws to 7-9 lb-ft (9-12 Nm).

(29) Repeat steps (20) through (28) for the outer bearing.

Figure 3-39. Bearing, Installation.

3-67