Disassembly - TM-55-1930-208-240079

TM 55-1930-208-24

3-19.

BLOWER - Continued.

b. Disassembly - Continued.

(10) Refer to figure 3-30 and install two gear pullers J6270F to the gears.

Figure 3-30. Installation of Gear Pullers.

(11) Remove drive gear (15, figure 3-29 and rotor gear (16) simultaneously.

(12) Remove shims (17, figure 3-29) from the rotor shafts or inner face of the gears and note the

number and thickness of shims used with each gear.

(13) Refer to figure 3-31 and remove three bolts (1), three flat washers (2), and bearing retainer (3).

Repeat for other bearing retainer.

(14) Remove two screws (4).

Figure 3-31. End Plate and Rotor, Removal.

3-62